Input Level Sensing Function; Reset Button - Yamaha MCX-CA15 Owner's Manual

Input level sensing function

In "B" mode, the MCX-CA15 automatically
activates (exits sleep mode) when its circuitry senses
a signal input from an external source connected to
the AUDIO IN jack.
You can use INPUT SENSE to change the
detectable signal threshold.
Turn INPUT SENSE to the right to increase
the detectable signal threshold.
Turn INPUT SENSE to the left to decrease
the detectable signal threshold.
INPUT SENSE
Notes
• If no input source is detected for five minutes or
longer, this function automatically switches the
MCX-CA15 to sleep mode.
• In sleep mode, output from the MCX-CA15 is
muted.
• If you turn INPUT SENSE all the way to the left,
the MCX-CA15 always remains in the active
state. If you turn it all the way to the right, the
MCX-CA15 always remains in sleep mode.
• This function is only available when the
MCX-CA15 is set to "B" mode.

RESET button

The RESET button is located on the inside front
panel.
RESET
Press the RESET button to restart the
MCX-CA15 only if:
• The MCX-CA15's protection circuitry has been
activated and the unit has switched itself off.
• You have changed the operation mode using the
MODE switch.
Note
When the MCX-CA15 is connected to a client and
you want to reset the system, press and hold
the client for ten seconds.
OPERATION
A B C
MODE
RESET
INPUT SENSE
on
11