Connections - Yamaha CX-1 Owner's Manual

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R. Also, refer to the owner's manual for each component to be connected to this unit.
< >
CX-1
Turntable
GND PHONO
L
MM/MC CARTRIDGE LOAD
220
R
Tuner
* : Refer to "ABOUT THE ACCESSORY COMPONENTS ON THE REAR PANEL" on page 6.
* The TAPE 3 terminals gain higher Signal-to-Noise Ratio than the TAPE 1 or TAPE 2 terminals. If you will
use a Digital Compact Cassette recorder or Minidisc recorder, etc., it is recommended to connect such a
component to the TAPE 3 terminals.
4

CONNECTIONS

Compact disc player
TUNER CD AUX
L
L L
IK
R
R R
Video cassette player,
LD player, etc.
Tape deck 2
TAPE 1 TAPE 2 TAPE 3 PRE OUT
PB REC OUT PB REC OUT PB REC OUT
Tape deck 1
Power amplifier
REMOTE AC OUTLETS
CONTROL
L
POWER AMP
R
SWITCHED
I20V 60Hz
200W MAX. TOTAL
I.7A MAX. TOTAL
(U.S.A. model)
To AC outlet
Tape deck 3