Yamaha NS-6HX Owner's Manual page 4

<
Bi-wired connections
Remove the short
bars before
connecting.
Woofer terminals
NS-6HX (R) NS-6HX (L)
SPEAKERS
R
L
+ – –
Amplifier or
Receiver
When using a banana plug
<
General model only
Banana plug
2
4
E-
>
Tweeter/Mid-range
–
NS-6HX (R)
+
+
Amplifier or
Both SPEAKERS A and B
should be selected.
>
3
1
Bi-Wired Connections
This speaker system is capable of bi-wired
terminals
connections. To connect the speaker to the output
terminals of the amplifier (or receiver), two pairs
of cables for each of woofer and tweeter/mid-
range are used instead of standard connections.
This type of connection decreases the modulation
distortion caused by electric resistance of the
cables and driving current of the speakers.
+
Consequently, purer sound quality can be
expected.
To utilize bi-wired connections, remove the short
bars from the terminals first, and then connect the
woofer and tweeter/mid-range to the amplifier
NS-6HX (L) separately using two pairs of cables.
SPEAKERS
R
L
A
– – +
B
Receiver
1
Remove the cover by pulling it toward you.
2
Tighten the terminal knob.
3
Simply insert the banana plug into the terminal.