Placing The Speakers - Yamaha NS-6HX Owner's Manual

ATTACHING THE SPIKES
Spike x 4
When setting up the speakers on a thick carpet, use the
spikes to increase stability and improve sound quality.
Attach the spikes at four points on the speaker properly by
following the procedure below.
2
Procedure:
1
Turn the nut close to the tip of the spike.
2
Screw the spikes into the hole of the stands.
3
Place the speaker in the desired location in an upright
position and adjust the length of the spike to match the
depth of the carpet.
4
When adjustment is finished, turn the nut up to the base
of the stand firmly.
Notes
G
The tips of the spikes may scratch or otherwise
damage the flooring. Please be careful when
positioning the speakers.
G
If force is applied to the side of the speaker, it may fall
and damage the speaker or cause personal injury.
Please be careful.
2
E-
I Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers
are slightly angled in towards the listeners.
Nut x 4
I Using as main speakers in a multi channel
system
Position the speakers on both sides of the TV. The
positioning of speakers is important, because it controls the
whole sound quality of a multi channel system. Set up the
speakers on the basis of your listening position by following
1
the owner's manual supplied with your amplifier.
Note
These speakers feature a magnetically shielded design,
but there is still a chance that placing them too close to
a TV set might impair picture color. Should this happen,
move the speakers away from the TV set.

PLACING THE SPEAKERS

NS-6HX
NS-6HX
Center
Effect L
Subwoofer
Effect R