Recording Mode - Duramaxx Inspex 4000 Manual

System
Record Setup
Play Mode
Master Reset
Firmware Update
Browse File
storage medium
Remove USB / micro SD Device
1. Set the Video button on the screen to
video.
2. Remove the insulation sheet from the
remote control.
3. Press button 5 on the remote control to
access the recording system.
4. Insert a USB or SD memory device into
the appropriate port. The existing con-
nection is displayed via the display and
LED indicator. Note: If you plug in the
device before the device is turned on, it
may not be recognised by the device. In
this case, remove the media device and
try again.
5. Press button 3 on the remote control
to start recording. The recording LED
turns on. Press button 3 again during
recording to take a photo of the current
image. The photo is saved on the sto-
rage medium. (The snapshot function is
available only on new models.)
20
Display software version, display product version, free and used
memory are connected
Choose between USB and SD as destination memory
Choose play mode
Press OK to reset the unit
Choose the location where the new firmware will be saved
Displays all files on the current SD or USB
USB- oder SD-Speichermedium auswerfen (nur wenn ein SD-/
USB-Speicher verbunden ist). Führen Sie diesen Menüpunkt aus,
bevor Sie ein SD-/USB-Speichermedium entfernen.
Eject USB or SD device (only when an SD / USB memory is con-
nected). Use this menu item before removing a SD / USB storage
device.

Recording Mode