Yamaha Digital Sound Projector YSP-800 Brochure page 7

A Multi-Channel Solution for Every Room.
The Yamaha Digital Sound Projectors employ a speaker array
powered by digital amplifiers, and our unique projection technology
to control the orientation of the sound. By focusing the sound into
"beams" and controlling the speaker delay times, the listeners
perceive the sounds to be coming from additional speakers placed
throughout the room, when in fact there is only the Yamaha Digital
Sound Projector TM .
Five-Beam
Five Modes Give You a Range of Listening Options
Five-Beam: Stereo:
All five channels — L , R, The left and right
C, Ls and Rs — are given woofers, with the Sound
separate orientations. beam speakers acting as
Sound is beamed off the tweeters, reproduce the
walls to create the effect effect of conventional
of a surround system stereo speakers.
with rear speakers.
Stereo Three-Beam
Three-Beam:
Three beams are
produced: L+ Ls, R+ Rs
and C. Reflecting the
sound off the walls
creates a surround sound
effect.
Stereo + Three-Beam
Stereo + Three-Beam: Target Mode:
The L and R channels are A single beam is focused
produced using stereo on one specific direction
mode while C, Ls and Rs providing a specific area
are produced using with audio from the
beaming. This mode is YSP... great for listening
effective when the YSP is outside the normal
placed in a corner. preset area.
Target Mode
7