Advertisement
s
-t
elf
est
C
is equipped with a Self-Test to regularly verify in the background that all sensors are working prop-
omPass
erly. The unit automatically runs diagnostic scans approx. every 10 minutes and if any abnormality is detected,
C
will respond by locking out all user input and the corner LEDs will flash RED
omPass
LEDs keep flashing RED
RED
test the visual and audible alert systems, so these should still be tested by user before each use.
WARNING! DO NOT use c
t
roUbleshootinG
If your C
appears to be unresponsive (e.g. the center GREEN
omPass
sleep mode. Move the unit several inches to see if the corner LEDs light ORANGE
resumes its normal flashing. If C
1. Try charging on any micro USB power source for at least 90 minutes, OR
2. Reset by pressing and holding the button for 8-10 seconds until LEDs display start-up animation, OR
3. If C
continues to malfunction or provides the RED
omPass
have attempted charging and/or resetting, stop using immediately and contact Safeguard for service:
If you have attempted all troubleshooting measures
and c
STOP using immediately. To resolve the issue,
www.safeguardequipment.com/return
SALES@SAFEGUARDEQUIPMENT.COM
and YELLOW
YELLOW, stop using C
ompass
remains unresponsive, you should:
omPass
continues to malfunction,
ompass
please fill out an RMA form at
or call (208) 773-9263.
and contact customer service. Self-test does not
omPass
if these lights are ON or FLASHING.
GREEN
LED is not flashing), it may have gone into
ORANGE
RED/YELLOW
YELLOW
"self-test" error warning after you
(208) 773-9263
RED
and YELLOW
YELLOW. If these
before the center LED
a P
rodUCt of
a
ll riGhts reserVed
© 2020
8
Advertisement
