Advertisement
d
P
eViCe
ositioninG
h
h
m
ard
at
oUntinG
C
should be worn on the underside brim of a hard hat, directly
omPass
in front of the user's face. Make sure the unit is within the user's field of
peripheral vision to maximize the visibility and effectiveness of voltage and
current alerts.
DO NOT OBSTRUCT
HOLD HERE
n
h
otes on
andheld
-
Always wear voltage-appropriate protective equipment when holding C
-
Detecting current in-hand allows users to trace live wires through some walls.
-
Shielding may cause limited alert range when detecting
fuse box voltage.
-
Do not allow C
omPass
a
o
lternate
PeratinG
In addition to hard hat and handheld use, C
on a wrist strap, clipped on a lanyard, or mounted on a hot stick.
s
i
afety
nformation
-
C
should be used only by trained and qualified personnel.
omPass
-
Always adhere to proper high voltage electrical safety practices.
-
Extreme humidity may decrease voltage/current detection range.
-
Before field use, always confirm that C
blinking green every 5 seconds) and test with a known source of voltage/current.
-
Always test and verify that the sensitivity settings on your C
and current most likely to be present in your workspace.
-
Some materials may shield electromagnetic fields from the detection circuits of your C
-
For optimal safety, always verify a potential voltage source is de-energized before making contact.
-
C
should only be used as a secondary voltage detection method.
omPass
SALES@SAFEGUARDEQUIPMENT.COM
h
o
andheld
If users are working with low voltage sources (120-2400 VAC) C
as a handheld device. For best results, sensitivity should be set to high. Users should
not attempt to detect voltage under 2400 VAC while C
their hard hat.
When using C
omPass
as this will significantly reduce or even eliminate its detection capabilities. Refer to
the photo and illustration at left for details on proper holding technique.
m
ode
to directly contact a live conductor.
P
ositions
can function
omPass
is powered on and working (as indicated by the center light
omPass
Peration
in handheld mode, DO NOT obstruct the front of the device
omPass
are appropriate for the levels of voltage
omPass
(208) 773-9263
can be used
omPass
is still attached to
omPass
.
.
omPass
a P
rodUCt of
a
© 2020
ll riGhts reserVed
3
Advertisement
