American Standard MONTERREY 6545 Series Installation Instructions

SPREAD LAVATORY
FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Recommended tools
Screwdriver
1
INSTALL VALVE ASSEMBLIES
Install LOCKNUTS (1), BRASS WASHERS (2) and RUBBER WASHERS (3) onto
valve shanks.
Install FERRULE (4) into COUPLING NUT (5). Thread onto VALVE (6, 6a) and
loosely tighten COUPLING NUTS (5).
Push TUBING (7) ends into VALVES (6, 6a) side outlets. Insert VALVES (6, 6a)
into mounting holes from underside of ledge.
Place RUBBER RING (8) into ESCUTCHEON (9) and thread onto VALVES (6, 6a)
until snug against internal stop.
Tighten LOCKNUT (1) to secure VALVES (6, 6a) into position.
Firmly tighten COUPLING NUTS (5).
Connect HOT water supply to inlet of left VALVE and COLD water supply to inlet of
right VALVE using appropriate connector.
5/16" MIN.
2
INSTALL HANDLES
Turn VALVES (1) to off position.
Insert ADAPTOR (7) with larger diameter over the VALVE STEM (4).
Align LEVER (2) or WRIST BLADE HANDLE (3) and install onto VALVE STEM (4).
Insert BLUE INDEX (5) into cold valve (right side) and red INDEX (6) into hot valve (left side).
Insert HANDLE SCREW (6) into HANDLES and tighten with screwdriver.
Channel Locks
CAUTION
9
8
6
MOUNTING SURFACE
3
2
1
Installation
Instructions
6530.173
6540.180
6545.Series
Adjustable Wrench
Turn off water at
main supply.
9
8
3
2
1
HOT
Certified to comply with ANSI A112.18.1M
M 9 6 5 0 4 6 R e v. 1 . 3
Tubing Cutter
MOUNTING
LEDGE
6
4
3
5
5
7
COLD
1
9
8
6a
4
6
5
2
3
7
4