Chapter 5 - Configuration: Server, Center And Client; To Edit Channel Properties (Basic) - iTrack User Manual

I-Track Vehicle Management System

Chapter 5 - Configuration: Server, Center and Client

After the initial set up has been completed, the I
ready to use. This chapter briefly details the configuration for the Server,
Center and Client applications. It should be used in conjunction with the
detailed information for each application.
Before using the system, the Administrator must enable each computer user
(operator) requiring access to the system. This can be done from the I
Client User Manager menu (See Part Five -11.2 , page 63).
Note: Only the user who has logged on "local to server" has the rights to the
microphone in version 6.1.5 of I -Track s oftware.
Before using the system, the Administrator must add vehicles requiring
access to (and to be tracked by) the system, This can be done from the
I-Track Vehicle Manager menu ( Part Five -11.1 , page 60).
Attach vehicles to all or selected users as required (
66).
5.1.a

To edit Channel properties (basic)

There are a number of additional settings and timings which can optimise
your particular installation/set up. These will help your I
more smoothly.
Note: See Chapter 7 - , Control Center , on page 30 , for detailed information
on all options and timings.
Open the I-Track Control Center, and Log In.
Select the Channels tab and click the
From the Edit window, select the Properties button. The following window is
displayed.
-Track system is nearly
Part Five -11.2.g , page
-Track system run
Edit button.
User Guide
-Track