Table of Contents
Advertisement
Turning the auto standby function
on/off
This function is used to turn on or off the auto
standby function.
• Select [AUTO STANDBY] in "GENERAL
SETUP PAGE".
ON
Select this to set this unit to the standby mode
automatically when disc playback is stopped
for more than 30 minutes or when the disc
menu is displayed for more than three hours
without performing any operation.
OFF
Select this to disable the auto standby
function.
Displaying the DivX
registration code
Yamaha provides you with a DivX
(Video On Demand) registration code that
allows you to rent and purchase videos using
®
the DivX
VOD service. For more
information, visit "http://www.divx.com/vod".
1
Select [DIVX(R) VOD CODE] in
"GENERAL SETUP PAGE", and then
3
press
.
The registration code appears.
2
Press ENTER to exit.
y
To purchase or rent the videos from DivX
service at "http://www.divx.com/vod", use the
registration code and download the video onto a
CD-R for playback on this unit.
Note
All of the downloaded videos from DivX
only be played back on this unit.
®
VOD
®
VOD
®
VOD
®
VOD can
Audio setup menu
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO OUT
SPEAKER SETUP
SPEAKERS
CD UPSAMPLING
NIGHT MODE
Setting the analog output
Set the analog output to match the playback
capability of this unit.
• Select [ANALOG OUTPUT] in "AUDIO
SETUP PAGE".
STEREO
Select this to change channel output to stereo,
which only delivers sound from the two front
speakers and subwoofer.
VIRTUAL SURR
Select this to reproduce the surround channels
virtually.
MULTI-CHANNEL
Select this setting when using a multi-channel
audio/(video) receiver with 6 channel inputs.
In this mode, this unit performs DTS decoding
or Dolby Digital 5.1-channel decoding when
applicable, and Dolby Pro Logic decoding on
DVD-Video, CD, VCD and SVCD discs with
2-channel sound tracks. No Dolby Pro Logic
decoding is done with DVD-Audio and
SA-CD discs.
Notes
• Even if you select [STEREO], audio signals are
not output at the subwoofer when
[SUBWOOFER] is set to [OFF] (see pages 33).
• Dolby Pro Logic II is not available for signals
output at the HDMI jack.
Setup Menu
31
En
Advertisement
Table of Contents
