Table of Contents
Advertisement
Disc Operation
Special DVD-Audio features
Changing pages
Many DVD-Audio discs include slide show
and page turn functions. You can display
information pages for photo galleries, artist
biographies, lyrics, etc. if these functions are
available on the disc.
2
3
Press
/
to move to the previous/next
page.
Press PAGE repeatedly to move to the next
page.
Playing bonus groups
Some DVD-Audio discs contain bonus groups
that require a four-digit password to gain
access. In this case, refer to the disc jacket and
other packaging for information.
1
When playback is stopped, enter the
desired bonus group number using the
numeric buttons (0-9), and then press
ENTER.
2
Enter a four-digit password using the
numeric buttons (0-9), and then press
ENTER.
1
During playback, press ON SCREEN
twice.
The group and track list appears on the
TV screen.
2
2
Press
to highlight a group.
3
Enter the desired bonus group number
using the numeric buttons (0-9), and
then press ENTER.
4
Enter a four-digit password using the
numeric buttons (0-9), and then press
ENTER.
24
En
OR
OR
Special SA-CD features
Changing the playback layer and
area
There are three types of SA-CD (Super Audio
CD) discs: single-layer, dual-layer and hybrid.
Each type may contain up to two areas of
recorded information: a high quality stereo
area and a high quality multi-channel area.
You can switch between the SA-CD multi-
channel and SA-CD stereo areas.
Note
SA-CD text is not supported with this unit.
y
For details about SA-CD, see "Super Audio CD" on
page 45.
To change the playback area
During playback, press SOUND MODE.
1
When playback is stopped, press
display folders.
2
Press 5/
to select the folder, and then
press ENTER.
3
Press 5/
to select the track, and then
press ENTER.
Note
Even when you change the playback area using
SOUND MODE, this unit selects the playback area
according to [ANALOG OUTPUT] setting in
"AUDIO SETUP PAGE" for other discs.
To change the playback layer
1
Press STOP ( 7 ) to stop playback.
2
Press AUDIO.
SA-CD indicator lights up only when
the SA-CD layer is selected.
•
Once CD layer is selected, this unit
always starts playing the CD layer until
this unit is set to the standby mode.
OR
2
to
Advertisement
Table of Contents
