PB TEEN Kennedy Clip Task Lamp Quick Start Manual

Advertisement

Kennedy Clip Task Lamp

IMPORTANT SAFETY INSTRUCTIONS:

This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be
fully inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
These instructions are provided for your safety. It is very important that they are read carefully and completely
before beginning the installation of this lighting fixture.
This fixture has been rated for up to one (1) 60-watt E26 TYPE A bulbs (not included) or one (1) 13-Watt compact
fluorescent bulb (included for California customers only
wattage.
This lamp is meant for indoor use.
Save these instructions.
WARNING:
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture,
allowing it to cool prior to replacing light bulb.
Do not touch bulb when the fixture is turned on. Do not look directly at a lit bulb.
Keep flammable materials away from the lit bulb.

Pre-Assembly:

Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.

Parts Included:

(1) Socket (A)
(1) Lamp Shade (B)
(1) Socket Ring (C)
.
). To avoid the risk of fire, do not exceed the recommended
A
B
C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kennedy Clip Task Lamp and is the answer not in the manual?

Questions and answers

Summary of Contents for PB TEEN Kennedy Clip Task Lamp

  • Page 1 Kennedy Clip Task Lamp IMPORTANT SAFETY INSTRUCTIONS: • This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
  • Page 2 To Assemble: Remove the Socket Ring (C) from the Socket (A). Insert the Lamp Shade (B) onto the Socket (A), then, secure by turning the Socket Ring (C) onto the Socket (A) in a clockwise direction until tight Insert one (1) 60-watt E26 TYPE A standard incandescent light bulb (not included) or one (1) one (1) 13-Watt compact fluorescent bulb (included for California customers only) into the socket.

Table of Contents