PB TEEN EM PALM FLOOR LAMP GOLD Assembly Instructions

Important Safety Instructions:
•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
•
This fixture has been rated for up to one 13-watt compact fluorescent light bulb(included for California customer
only ) Or use 60-watt maximum TYPE A standard incandescent light bulb (not included) To avoid the risk of fire,
do not exceed the recommended wattage.
•
Use with approved PBKIDS Shades only, having a minimum opening diameter of 3-1/2 inches and a minimum
lamp-to-shade spacing of 2-1/2 inches.
•
This lamp is meant for indoor use.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.
Pre-assembly:

Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts Included:
(A) Leaves (9)
(B) Leaves Holder (1)
(C) Sockets (3)
(D) Pipe (3)
(E) Base (1)
(H) In Line On/OFF Switch (1)
EM PALM FLOOR LAMP GOLD
Assembly Instructions
US/CN
Page 1 of 3