Control Box With Power Supply; Remote Control With Spiral Wire - Cama Handi-Lift 7 Handbook

The key lock (pos 5 on sketch in section 2.2) is used to lock the control box and only this
control box. By turning the key you will turn on the power supply to the control box. The
control box is turned on when the key is horizontal.

Control box with power supply

The key lock (pos 5 on sketch in section 2.2) is used to lock both control boxes and the
green light is turned off on both control boxes.
2.2.6 Light diode:
The light diode (pos 6 on sketch in section 2.2) is lit when the control box is turned on.

2.3 Remote control with spiral wire:

The remote control with spiral wire is extra equipment and not standard on all lifts. The
remote control with spiral wire can replace the function of the joystick and is often used
by a helper. The remote control is connected to the control panel on the lift (pos 3 on the
© 2010
1. Up
2. Down
Page 12 Version 1.0
Handi-lift 7