Advertisement
Step 32
Fasten the SAFETY BRACKET (Y) for added stability. Use a BLACK 9/16" LARGE HEAD
å
SCREW (RR) into the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (MM) into a
stud in your wall.
Push the HOLE PLUGS (FF and GG) into the visible holes, not including the adjustable shelf pin
å
holes in the SMALL DOOR assembly and UPRIGHT (D).
NOTE: To raise a corner of the unit, turn the ADJUSTABLE GLIDE counter-clockwise. To lower a
å
corner, turn the ADJUSTABLE GLIDE clockwise.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
5 lbs.
20 lbs.
5 lbs.
25 lbs.
5 lbs.
20 lbs.
5 lbs.
5 lbs.
5 lbs.
Page 36
No load
30 lbs.
35 lbs.
D
30 lbs.
60 lbs.
Y
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
(6 used)
GG
(8 used)
FF
411572
LARGE DOOR ON RIGHT
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
www.sauder.com/services
MM
RR
Advertisement
