This function lets you reset (initialize) all Master parameters to their default settings. It also allows you to selectively initialize certain parameters, such as

Common settings, settings for each Zone, and so on — very useful when creating a completely new Master from scratch.

Parameter Types (for Initializing): All, Common, Zone

ALL

All settings for the selected Master are initialized.

Common

Common parameter settings for the selected Master are initialized.

Zone

You can initialize the Zone setting to one of the following three types.

Splits the keyboard range using Zone 1 and Zone 2. "UpperCh" determines the MIDI transmit channel of the upper range of the keyboard, "LowerCh"

Split

determines the MIDI transmit channel of the lower range of the keyboard, and "SplitPoint" determines the note (C2 ~ G8) number which separates the

upper range and lower range of the keyboard.

4Zone

Initializes all four Zones.

Layer

Lets you layer two parts using Zone 1 and Zone 2. "UpperCh" and "LowerCh" determine the MIDI transmit channels of the two Zones respectively.

[F4] BULK (Bulk Dump)

This function lets you send all your edited parameter settings for the currently selected Master to a computer or another MIDI device for data archiving. For

details, see page 126.

In order to execute Bulk Dump, you'll need to set the correct MIDI Device Number, with the following operation: [UTILITY]

Master Store mode

This function lets you store your edited Master to User memory. For details, refer to page 126 in the Quick Guide section.

[MASTER]

[JOB]

[MASTER]

Master selection

Master Job mode

[F5] MIDI

[SF1] CH

DeviceNo.