Using The Controls; The Reverb - Yamaha Silent Violin SV130 Owner's Manual

1
Slide the POWER switch, located on the rear of the
instrument, to its ON position. The lamp will light
green.
2
Connect the stereo earphones to the PHONES jack
on the side of the instrument, make sure that the L
& R side earphones are used in the correct ears.
3
Rotate the VOLUME dial to the desired playing
level.
• Do not operate at high volume levels when using earphones.
Doing so can lead to irreparable damage to your hearing.
The Silent Violins incorporates Yamaha's
DSP reverb technology. Play while trying out
the three types of reverb.
1
Slide the POWER switch to the REV. ON position,
the lamp will light red, and reverb will be applied to
the Silent Violin's sound.
2
Slide the REVERB switch to select one of the three
reverb modes.
• ROOM mode ........ this reverb simulates the natural reverberation found in a room.
• HALL 1 mode ...... this reverb simulates the natural reverberation found in a hall.
• HALL 2 mode ...... the same reverb simulation as HALL 1 but with a longer decay time.

Using the Controls

The Reverb

Lights green
Lights red
11