Yamaha Silent Viola SVV-200 Owner's Manual page 10

3
Insert the string into the hole on the peg and wind
the string onto the peg.
• On the 1st (A) and 2nd (D) strings, make
two winds toward the 3rd and 4th string side
of the peg, then wind back over those winds
and to the opposite side of the string hole.
• On the 3rd (G) and 4th (C) strings, make two
winds toward the 1st and 2nd string side of the
peg, then wind back over those winds and to
the opposite side of the string hole.
Next, make sure that the bridge does not fall over
as you wind the strings. Ensure that the strings
pass over the corresponding slits on the top of
the bridge. (Make sure that the bridge is standing
vertically.)
4
Use a piano, tuning fork, tuner, etc., and adjust
the pitch of each string using the tuning pegs.
5
Use the adjuster on the 1st string for fine tuning
of string's pitch.
• Do not over-tighten or over-loosen the adjuster. It may result in damage to the
Caution
• When the instrument is not going to be used for an extended period of time, loosen the strings until
the pitch drops a whole tone.
10
instrument or be a source of noise during performance.
3rd (G) and
4th (C) strings
3rd string (G)
Rotate the
tuning peg
as shown
4th string (C)
1st (A) and
2nd (D) strings
2nd string (D)
Rotate the
tuning peg
as shown
1st string (A)
Adjuster