Outdoor Revolution CompactAirLite Annexe Instructions & Care Manual page 3

PLEASE READ THE FOLLOWING ERECTION
INSTRUCTIONS CAREFULLY.
TIP: Refer to the photograph to help when pitching your CompactAirLite Annexe
1. Spread the flysheet out on the
ground next to the door of the car-
avan awning you wish to attach it
to.
3. Zip the annexe zip on to the zip on the
caravan awning doorway.
2. Zip out the door on the caravan
awning and stow away somewhere
dry and clean.
4. Before inflating the AirFrame Tube
make sure the Dynamic Speed Valve
quick release button is pressed out.
This makes sure the air will be held
inside the AirFrame tube.
4
5. Next, attach the pump to the
Dynamic Speed Valve and begin to
carefully inflate - taking care that no
part of the fabric is caught anywhere.
7. Place the cap back in the valves and
cover with the Velcro sleeve to keep
the awning looking neat and tidy.
9. Peg out all the remaining pegging
points and guy lines starting from one
corner and work round the awning.
6. Inflate the AirFrame until you can give it a
good squeeze. The tube wants to have
room inside for air to expand. Don't worry if
you do keep inflating - the Intelligent Frame
will release any excess air. (Please note the
Intelligent Frame is set to 5.5psi).
8. Then peg out and tension the front of
the annexe. Use the adjustable pegging
straps to tension the annexe as you
desire. Make sure you don't over tension
the fabric.
5