Advertisement
Available languages
Available languages
7
Opening the Keystone
1. Push the screwdriver into the locking mechanism and open the enclosure lid.
2. The cable will need to be cut to length again for re-assembly.
3. The IE FC Keystone can be assembled a maximum of ten times.
8
Replacing the knife cassettes of the stripping tool
Note
Replace the knife cassette if the cut is not clean or after approximately
1500 stripping operations on cables with PVC outer jackets
•
150 stripping operations on cables with PUR outer jackets
•
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining
designations in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
Disclaimer of liability
We have checked this document for agreement with the hardware and software described.
Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However,
the data in this manual is reviewed regularly and any necessary corrections included in
subsequent editions.
Siemens AG
Industry Sector
© Siemens AG 2019. All rights reserved
16
IE FC Keystone CAT 6
A
A5E45167582-AC, 09/2019
Advertisement
