Greasing And Lubrication; Storage - Toro Z-Master Operator's Manual

Maintenance

Greasing and Lubrication

All bearings of the blower drive system are
permanently lubricated and do not need to be greased.
20

Storage

1. Clean any dirt and chaff from the chute, blower
and hopper.
2. Scrape any heavy buildup of grass and dirt from
the chute, blower and hopper, then wash with a
garden hose.
3. Check the condition of the blower belt.
4. Check and tighten all bolts, nuts and screws.
Repair or replace any part that is damaged or
defective.
5. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service
Dealer.
6. Store the machine in a clean, dry garage or
storage area. Cover the machine to protect it and
keep it clean.