IKEA MIRAKULOS Manual page 14

ENGLISH
Clock function
To set when the oven
turns off. Use only when a
END
heating function is set.
Combination of DURA-
TION and END function.
TIME DELAY
Use to set a countdown
time. This function has no
MINUTE
effect on the operation of
MINDER
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00 If you do not set any oth-
COUNT UP er clock function the
TIMER COUNT UP TIMER auto-
matically monitor how
long the oven works.
The counting starts imme-
diately when the oven
starts to heat.
The Count Up Timer can-
not be used with the func-
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Turn the knob for the temperature to set
the hours.
2. Press to confirm and set the minutes.
The display shows
"00" flashes.
3. Turn the knob for the temperature to set
the current minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
Application
and "12:00".
and the set hour.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function
1. Set a heating function.
2. Press again and again until
to flash.
3. Turn the knob for the temperature to set
the minutes and press
Turn the knob for the temperature to set
the hours and press
When the set Duration time ends the signal
sounds for 2 minutes.
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
Setting the END function
1. Set a heating function.
2. Press again and again until
to flash.
3. Turn the knob for the temperature to set
the hours and press
the knob for the temperature to set the
minutes and press
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
Setting the TIME DELAY function
1. Set a heating function.
2. Press again and again until
to flash.
3. Turn the knob for the temperature to set
the minutes for DURATION time and
press to confirm. Turn the knob for
14
again
starts
to confirm.
to confirm.
and time setting
starts
to confirm. Turn
to confirm.
starts