Advertisement
OPERATION
Note: Always pull the screen down or retract either at a steep incline or a 90-degree vertical
angle. Do not allow the screen to touch the case while opening or retracting to avoid
damaging the screen material.
1.
Pull the screen down using the lanyard or by the handle at either a sharp incline or
a 90-degree angle. Do not pull the screen down by its material or touch the
screen, as it will cause damage and likely void the warranty. (Figure 3)
Note:
An internal auto-lock mechanism system will cause the screen to stop and lock on the
desired position at intervals.
2.
If you want the screen to retract back into the case, simply pull the screen down
more than 5cm (2") and retract the screen back, guiding the material in a gentle
motion.
Note:
Improperly bringing the screen up or down will damage the screen material or rolling
mechanism.
MAINTENANCE
Clean the screen material using a soft cloth and mild soapy water. When not in use, retract
screen in its housing to keep the surface clean.
Figure 3
Advertisement
