Olsberg 43/1481.9240 Instructions Manual page 9

Checking the combustion air damper for faultless function
Display
service level
relay
input data
parameter
components
service
relay test
auger off
exhaust off
ignition off
grate
pump off
supply air off
convection off
Action Description
The combustion air damper must be checked for
or faultless function. To do this, switch the combustion
air damper on and off in the "relay test" menu.
Go to the "relay test" menu using ↓ or ↑ and (ENTER).
Select "off" with (ENTER) ("off" flashes), and with
↓ or ↑ change over to "on".
Confirm "on" with (ENTER).
or
Check for faultless function by performing a visual
inspection of the damper position or the stop on the
motor (Fig.1).
9