Advertisement
Available languages
Available languages
⑨
⑨
④
8. Insert both cymbal rod connector clamps (7)
into the top of center posts.
⑨
9.
Insert cymbal rod (8) into cymbal rod
connector clamps (7).
10. Insert hex rod sleeves (9) into their
clamps as shown in the picture.
11. Insert the L-shaped hex rod (10) into
a hex rod sleeve (9) as shown in the
picture.
12. Insert the other hex rods (11) into the
hex rod sleeves (9).
⑨
⑨
⑤
Advertisement
