2Box SpeedLight Kit User Manual page 6

④
⑥
①
4a
WARNING: Fasten related wing nuts after
each step to avoid that components fall.
1. Insert post (1) into cross bar (6) as shown
in the picture. Fasten its wing nuts.
2. Turn the side without wing nuts towards
you. Insert bar (4) into the left center
post (1L).
3. Take off the rubber foot on left center
post (1L) and move down bar (4) so the
snare bracing rod (4a) can be fitted into
the bottom of left center post (1L).
①