F5. Other Functions; F6. Metronome Volume; F7. Preset Song Part Cancel Volume - Yamaha P-90 Owner's Manual

Yamaha electronic piano owner's manual p-90
Table of Contents

Advertisement

F5. Other Functions

This function conveniently lets you set opera-
tion of the sustain pedal to one of the modes
listed below.
1. Engage Function mode and select
2. Press the [+/YES] button to engage the other
functions' sub-mode, then use the [TEMPO/
FUNCTION#
,
] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the val-
ues.
Sub-mode
F5.3 Sustain Sample Depth
Setting range:
0 – 20
Normal setting: 12
The
voices feature special "Sustain
[GRAND PIANO 1]
Samples" that recreate the unique resonance of an acous-
tic grand piano's soundboard and strings when the sus-
tain pedal is pressed. This function lets you adjust the
depth of this effect.
F5.4 Key-off Sample Volume
Setting range:
0 – 20
Normal setting: 10
You can adjust the volume of the keyoff sound (the sub-
tle sound produced when the keys are released) for voices
,
[GRAND PIANO1]
[CLAVI./HARPSI.]
variations).

F6. Metronome Volume

You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
.
1. Engage Function mode and select
2. Use the [–/NO] and [+/YES] buttons to set the
Setting range:
Normal setting: 10

F7. Preset Song Part Cancel Volume

This function sets the volume at which a "can-
celed" part is played during preset song play-
back. Adjust the part volume to a comfortable
level and use the "canceled" part as a guide
with which to play along.
(including their
1. Engage Function mode and select
2. Use the [–/NO] and [+/YES] buttons to set the
Setting range:
Normal setting: 5
metronome volume as required.
1 – 20
SHORTCUT:
You can jump directly to the metronome functions
pressing the [FUNCTION] button while holding the METRO-
NOME [START/STOP] button.
Even if you entered a Function mode via a shortcut, you must
use the usual method to exit (i.e., press [FUNCTION] button
to make the function indicator go dark).
volume as required.
0 – 20
Detailed Settings – [FUNCTION]
P-90
.
by
.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents