Yamaha MOTIF-RACK Owner's Manual page 84

6-
Press down the other side until it is securely
2
settled on the hooks 2.
6-
Put the cable into the MOTIF-RACK, making
3
sure that no part of the cable sticks out of the
instrument.
7
Replace the Plug-in board cover by fastening the six
flat-head screws you removed in the step 2 above.
84
Optional Plug-in Board Installation
Removing the Plug-in board from the
MOTIF-RACK
1
Press down the hooks 2 in the direction as shown
in the illustration and take the board out from the
hooks 2 by lifting up the one side.
hook 2
2
Pull out the other side of the board from the
hooks 1 while pressing down hook 1 as shown in
the illustration.
3
Pull out the cable connector from the Plug-in
board connector.
hook 1
hook 2