Yamaha MG10/2 Owner's Manual page 3

Connector pin assignments
XLR-type connectors are wired as follows
G
Pin 1: ground; Pin 2: hot (+); Pin 3: cold (–).
INSERT TRS phone jacks are wired as follows
G
Sleeve: ground; Tip: send; Ring: return.
Replacement of Consumable Parts
The performance of components with movable contacts—such
G
as switches, rotary controls, faders, and connectors—deteriorates
over time. While the rate of wear may vary greatly according to
usage conditions, some amount of wear is unavoidable. When
parts wear out, consult your dealer about appropriate replace-
ments.
Always turn the power off when the mixer is not in use.
G
Even when the power switch is in the "STANDBY" position, electricity is still flowing to the mixer at the minimum level. When you are
G
not using the mixer for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.
Copying of commercially available music data and/or digital audio files, except for personal use, is strictly prohibited.
Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation.
Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners.
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your
plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
—For correct operation —
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (2 wires).
Interference from Cell Phones
Use of a mobile phone near this unit may induce noise. If noise
G
occurs, move the phone further from the unit.
Precautions
MG10/2
3