Table of Contents
Advertisement
PAutomatic programmes
Y ou can prepare food really easily using the automatic
A u t o m a t i c p r o g r a m m e s
programmes. You select the programme and enter the
weight of your food. The automatic programme then
applies the most suitable settings. You can select from
15 programmes.
Notes
Take the food out of its packaging and weigh it. If it
■
is not possible to enter the exact weight, you should
round it up or down.
Place the food in the cold cooking compartment.
■
For the programmes, always use microwaveable,
■
heat-resistant cookware, for example made of glass
or ceramic. Observe the accessories tips in the
programme table.
For an optimal cooking result, use food that is in
■
good condition and chilled meat only. For frozen
food, use food straight out of the freezer only.
Setting a programme
Example in diagram: Programme 3 with a weight of
1 kg.
Set the function selector to X automatic
1.
programmes.
The first programme number and weight suggestion
are shown in the display.
Use the rotary selector to select programme number
2.
3.
Touch h.
3.
The weight setting is highlighted in the display.
Use the rotary selector to set the weight to 1 kg.
4.
The appliance automatically sets the right cooking
time for that weight.
Touch u.
5.
The programme will start. The cooking time visibly
counts down and the temperature bar and the u LED
light up.
Notes
Before starting you can use X and ‚ to switch
■
between programmes and weight.
Once you have started the programme, the
■
programme number and weight cannot be changed.
You can check the set weight by touching ‚.
The programme has ended
An audible signal sounds. The programme has finished;
the appliance stops heating.
Turn the function selector to the off position.
Changing the programme
Touch the u field for approx. four seconds.
1.
The programme is reset.
Select a new programme.
2.
Pausing the operation
Touch the u field or open the appliance door.
1.
The operation is suspended and the u LED
flashes.
Close the appliance door.
2.
Touch the u field.
3.
The operation is continued and the u LED lights
up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
The fan may continue to run after the appliance
Note:
has been paused or stopped.
Automatic programmes
en
23
Advertisement
Table of Contents
