MSI X299 PRO Quick Start Manual page 16

Internal Connectors
LED Connectors
Internal Buttons
Jumper
Debug LED
I/O Controller
Hardware Monitor
Form Factor
6
Specifications
Continued from previous page
∙ 1x 24-pin ATX main power connector
∙ 2x 8-pin ATX 12V power connectors
∙ 6x SATA 6Gb/s connectors
∙ 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
∙ 2x USB 3.2 Gen1 connectors (supports additional 4 USB
3.2 Gen1 ports)
∙ 1x USB 3.2 Gen2 Type-C port
∙ 1x 4-pin CPU fan connector
∙ 1x 4-pin Water Pump connector
∙ 4x 4-pin system fan connectors
∙ 1x Front panel audio connector
∙ 2x System panel connectors
∙ 1x TPM module connector
∙ 1x Chassis Intrusion connector
∙ 1x Virtual RAID on CPU connector
∙ 1x Thunderbolt Add-on Card Connector
∙ 1x 4-pin RGB LED connector
∙ 2x 3-pin ARGB LED connectors
∙ 1x 3-pin CORSAIR LED connector
∙ 1x Power button
∙ 1x Reset button
∙ 1x Clear CMOS jumper
∙ 4x EZ Debug LED
NUVOTON NCT6797 Controller Chip
∙ CPU/System temperature detection
∙ CPU/System fan speed detection
∙ CPU/System fan speed control
∙ ATX Form Factor
∙ 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Continued on next page