Technical Data - Smeg UKS7323LFEP1 User Manual

12
symbol or coloured green and
yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter
"N" or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp (E)
is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING! A cut off plug
inserted into a 13 amp socket
is a serious safety (shock)
hazard. Ensure that it is
disposed of safely.

TECHNICAL DATA

Technical data
Dimensions of the recess
Height
Width
Depth
Voltage
Frequency
The technical information is situated in the
rating plate, on the external or internal
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
the packaging in relevant containers to
recycle it. Help protect the environment
Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
CAUTION! Refer to the
assembly instructions for the
installation.
mm
mm
mm
Volts
Hz
side of the appliance and in the energy
label.
and human health by recycling waste of
. Put
electrical and electronic appliances. Do
not dispose of appliances marked with the
min.
200 cm 2
min.
200 cm
1780
560
550
230 - 240
50
2