Operation And Controls; Boiling Water - Princess 2198 User Instructions

New classics kettle
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
General
This attractive Princess New Classics
Kettle is one of the products in our New
Classics range, all of which are finished in
sturdy chrome-plated steel. Your jug kettle
can boil between 0.5 and 2 litres of water
very quickly.
The kettle, with a power rating of 2300 W,
is comprised of a jug with a hinged lid, a
limescale filter, and an external indication
of the water level. The kettle's base is
connected to a 220 - 240V mains power
supply. The power cord can be stored by
wrapping it around the convenient lugs on
the base.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 Jug
2 On/Off switch with indicator light
3 Handle
4 Release button
5 Lid
6 Descaling filter (detachable)
7 Spout
8 Water-level indicator
9 Base
10 Power cord and plug
Before use for the first time
1 Take the appliance out of the
packaging.
2 Boil a full jug of water
3 Dispose of the boiled water.

Boiling water

1 Detach the jug from the base.
2 See Figure 2. Press the release button
to open the lid. Fill the jug with the
required amount of water. To avoid
damage, fill the jug with a minimum of
0.5 l and a maximum of 2 l water. Make
sure that you do not spill any water on
the base.
3 Close the jug's lid by pressing it until it
clicks into place.
4 Place the jug on the base, and insert
the plug in the wall socket. Push the
On/Off switch downwards (into position
I) such that the indicator lamp
illuminates.
5 The jug kettle is now switched on, and
the water will now begin to heat. The
jug kettle switches off automatically a
few seconds after the water has come
to the boil. However, this automatic cut-
out operates only when the jug's lid is
closed securely. If so required, you can
stop heating the water by pushing the
On/Off switch upwards.
6 The indicator light extinguishes once
the jug kettle is switched off.
7 A further quantity of water can be boiled
once the appliance has cooled down
(after about 5 minutes).
8 The kettle is fitted with a triple
safeguard which prevents the kettle
from producing too much steam, boiling
dry, or overheating. The safeguard will
switch off the jug kettle if it is operated
without water. Allow the jug kettle to
cool down for at least 10 minutes before
using it again.
New Classics Kettle 2300W Article 2198
5

Advertisement

Table of Contents
loading

Table of Contents