4.2 Manual clock Setting:
4.2.1: Setting of the period of the day
Note:
‐ All Setting modes will automatically exit after 15 seconds
if no adjustment is made.
‐ (Press and hold the "▼" (B3) or "▲" (B2) button, to reach
the desired value more quickly).
If the period of the day is not indicated on the screen
(DP1), press the SET (B1) button once to make it appear.
Setting by default:
MORNING = 7:01 – 12:00 EVENING = 17:01 ‐ 23:00
AFTERNOON = 12:01 – 17:00
NIGHT = 23:01 ‐ 7:00
Press and hold the SET (B1) button until the word
"MORNING" flashes.
Set the correct hour for this period by pressing the "▼"
(B3) or "▲" (B2) buttons then press the SET (B1) button
to save.
"AFTERNOON" now blinks, set the correct hour for this
period by pressing the "▼" (B3) or "▲" (B2) buttons
then press the SET (B1) button to save.
"EVENING" now blinks, set the correct hour for this
period by pressing the "▼" (B3) or "▲" (B2) buttons
then press the SET (B1) button to save.
"NIGHT" now blinks, set the correct hour for this period
by pressing the "▼" (B3) or "▲" (B2) buttons then
press the SET (B1) button to save and exit.
4.2.2: Setting the time zone and clock (date, year,
hour and month)
If the day and the year are not indicated on the screen
(DP3), press the SET (B1) button to make them appear.
Press and hold SET (B1) button until 00 blinks. Press the
"▼" (B3) or "▲" (B2) buttons to select the correct time
zone then press SET (B1) button to save. 00 by default.
Now the year blinks. Press the "▼" (B3) or "▲" (B2)
buttons to select the correct year then press SET (B1)
button to save.
Now the month blinks. Press the "▼" (B3) or "▲" (B2)
buttons to select the correct month then press the SET
(B1) button to save.
Now the date blinks. Press the "▼" (B3) or "▲" (B2)
buttons to select the correct date then press the SET
(B1) button to save.
Now the hour's digits blink. Press the "▼" (B3) or "▲"
(B2) buttons to set the hour then press the SET (B1)
button to save.
Now the minutes' digits blink. Press the "▼" (B3) or
"▲" (B2) buttons to set the minutes then press SET (B1)
button to save and exit.
4.1.3 Setting the language and display type
In normal setting pattern, press and hold the "▲" (B2)
4 5 6
button until you have the language set blinking Press "▼"
(B3) or "▲" (B2) button to select the correct language
then press the SET (B1) button to save.
Note: You have the choice between the following 14 languages:
English, Français, Deutsch, Nederlands, Italiano, Espanol,
Portugues, Swenska, Norsk, Dansk, Suomi, Polski, Ceska
and Magyar.
Press the "▼" (B3) and "▲" (B2) buttons to select your
language then press the SET (B1) button
Press the "▼" (B3) and "▲" (B2) button to select your
display type then press SET (B1) button to exit
a) DP1: Day + Period of the day + Time
b) DP2: Day + Date + Time
c) DP3: Day + Date + Year
d) DP4: In this mode, you can select both (DP1, DP2 or
DP3) mode, the clock will then switch between the third.
By default, the switch will happen every 5 seconds but you
have the possibility to increase the time period between
two switches (up to 60 seconds).
5. Precautions
The clock loses its time information when the power
adaptor is removed and you have not inserted the alkaline
batteries.
Do not expose it to direct sunlight, heavy heat, cold,
high humidity or wet environments
Never clean the device using abrasive or corrosive
materials or products. Abrasive cleaning agents may
scratch plastic parts and corrode electronic circuits.
6. Radio controlled time reception range:
up to 1200km from MSF transmitter.
7. Guarantee
From the moment your Geemarc product is purchased,
Geemarc guarantee it for the period of two years. During
this time, all repairs or replacements (at our option) are
free of charge. Should you experience a problem then contact
our helpline or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorised
Geemarc representative. The Geemarc guarantee in no way
limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF
A WARRANTY CLAIM.
CE Declaration: The declaration of conformity may be
consulted at www.geemarc.com
8. Recycling directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products in end of life are recycled
in the best way.
When this product is out of order, please do not put it in
your domestic waste bin.
Please use one of the following disposal options:
‐ Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in in a appropriate WEEE skip.
‐ Or hand the old product to the retailer. If you purchase a
new one, they should accept it.
For product support and help visit our website at
www.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields,
Welwyn Garden City, Hertfordshire, AL7 1SB,UK
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
UGViso15_MSF(UK)_En_A4_V1.0