Cleaning The Click-On Attachments - Philips S5000 Series Manual

Cleaning the click-on attachments

3 Switch on the appliance and rinse the pop-up
trimmer with warm water.
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the
pop-up trimmer air dry.
6 Close the trimmer.
Tip: For optimal performance, lubricate the teeth
of the pop-up trimmer with a drop of mineral oil
every six months (oil not included).
Never dry the trimmer or beard styler attachments
with a towel or tissue, as this may damage the
trimming teeth.
The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your product.
Clean the click-on attachments after each use for
optimal performance.
1 Make sure that the appliance is switched off.
2 Twist the attachment to remove it from the
handle.
Pull the cleansing brush head straight off of the
attachment holder.
3 Clean the parts thoroughly with warm water.
Use soap only on the cleansing brush
attachment.
Tip: If rinsing the nose/ear trimmer attachment
under the tap is not sufficient, press the
attachment onto handle and immerse the
trimming head in a glass with warm water for a
few minutes. Then switch on the appliance and
rinse it under the tap.
21
English