Try Recording; Record; Playback - Yamaha DD-50 Owner's Manual

Try Recording

The DD-50's Custom Song feature (song number "CU") allows you to record and playback
one original song (600 notes approximately).
Data that can be recorded in the Custom Song Mode.
• Drum pad and pedal data.
• Song data (the number cannot be changed while in the RECORD Mode).
• Track ON/OFF settings.
• Tempo setting (The tempo cannot be changed while in the RECORD mode).
• Song Volume setting.
• Reverb ON/OFF setting.
• Break ON/OFF setting.
* MIDI data cannot be recorded to the memory.
BREAK/
TAPSTART
START/
oo
STOP
A-B
REPEAT
BREAK/
TAPST ART
ST ART/
STOP
A-B
REPEAT
The recorded Custom Song (song number "CU") can be played back in the same manner as any
song (song numbers "00"-"99").
BEAT
CU

RECORD

1
Prepare to Record
Select the desired song, drum kit, tempo, track on/off setting, and
reverb settings.
2
Start Recording
Press both the [START/STOP] and [BREAK/TAP START] buttons
BEAT
simultaneously, after a count-in (the indicator will flash) recording will start.
• Data will not be recorded during the 2 measure count-in.
• Press the BREAK/TAP START button during the 2 measure count-in to enter Tap
Start Record Standby mode (see page 12).
• Press the CLICK button to cancel the metronome during recording.
3
Stop Recording
To stop recording, press the [START/STOP] button.
• Any previously recorded data will be replaced with new data.
• If the memory becomes full while recording is in progress, "FL" will appear in the
display and recording will automatically stop.

Playback

Song number "CU" follows Song number "99" (or prior to "00").
• The A-B REPEAT mode (see 14 page) cannot be used in the Custom Song Mode.
15