Function [Midi 4] Display - Yamaha Clavinova CVP-201 Owner's Manual

MIDI
Z Select the channel.
Use the
the channel you want to enable or disable.
An underline cursor is displayed below the selected channel
number.
X Press the rightmost LCD button.
When the selected channel is enabled,
channel number is enclosed in a solid box. When it is disabled,
is highlighted, and the channel number is displayed without a
surrounding box.
FUNCTION [MIDI 4] Display — page 12
MIDI Transpose
The MIDI Transpose function determines whether the Transpose set-
ting in the FUNCTION [KEYBOARD 1] display (page 136) will affect
the MIDI data received by the Clavinova.
The Clavinova will normally transpose the data it receives. Press the
Send Channel (Accompaniment/Harmony)
When the
data for the rhythm and accompaniment parts is transmitted via the MIDI
[OUT] terminal over MIDI channels 9 through 16.
If the
harmony types listed below are transmitted via the MIDI [OUT] terminal
over MIDI channels 6 through 8.
150
CVP-201
< and > LCD buttons to select the number of
......................................................................................................
button to switch this function on or off.
&
function is set to
function is set to
is highlighted and the
............................
, the performance
, the notes added by the
MIDI TRANSPOSE
• Settings: ON (enabled),
OFF (disabled)
• Basic setting: ON
SEND CH (ACMP&RHY)
• Settings: OFF (not transmitted),
9–16ch (transmitted)
• Basic setting: OFF
SEND CH (HARMONY)
• Settings: OFF (not transmitted),
6–8ch (transmitted)
• Basic setting: OFF