Trocen AWC608C Manual
  1. Manuals
  2. Brands
  3. Trocen Manuals
  4. Controller
  5. AWC608C
  6. Manual

Trocen AWC608C Manual

Laser cutting & engraving system, laser cad v5.85
Hide thumbs
Table of Contents

Advertisement

Quick Links

AWC608C
M a n u a l
L a s e r C u t t i n g & E n g r a v i n g S y s t e m
L a s e r C A D V 5 . 8 5
Shenzhen Trocen(Anywells) Automation CO.,LTD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AWC608C and is the answer not in the manual?

Questions and answers

Related Manuals for Trocen AWC608C

Summary of Contents for Trocen AWC608C

  • Page 1 L a s e r C u t t i n g & E n g r a v i n g S y s t e m L a s e r C A D V 5 . 8 5 Shenzhen Trocen(Anywells) Automation CO.,LTD...

  • Page 2: Table Of Contents

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Chapter 1 Profile ..............................4 1.2 Composition ............................... 4 1.3 Software Versions............................4 1.4 Software Features ............................4 1.5 Operating System Environment Requirement..................5 Chapter 2 Installation............................5 2.1 Installation Steps............................5 2.2 Cautions..............................6 Chapter 3 Basic Operation of LaserCAD......................
  • Page 3 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.13.5 Unite Lines..........................42 3.13.6 Image Invert..........................42 3.13.7 Image Dither..........................42 3.13.8 Parallel Offset .......................... 43 3.13.9 Estimate Work Time ....................... 44 3.13.10 Simulate ..........................44 3.14 Default Parameters ..........................44 Chapter 4 Laser Machining ..........................45 4.1 Position Relative............................
  • Page 4 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 7.5 Z/U axis ..............................78 7.6 Files system .............................. 78 Chapter 8 Introduction Manual of Color LCD Panel .................. 80 8.1 Function introduction to each key ......................80 8.2 Interface of starting computer ....................... 82 8.3 Function introduction to main interface ....................

  • Page 5: Chapter 1 Profile

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Chapter 1 Profile 1.1 Introduction This system controls laser CNC machine by computer and completes machining task according to different requirement of different user. System consists of control system, control panel and matched software. This manual is to introduce how to use software to complete machining task. 1.2 Composition Control system consists of hardware (control card) and software.

  • Page 6: Operating System Environment Requirement

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 laser head. Multiple functions of Path Optimization and pause function during working. Multiple saving modes of image and working parameter, and can be recycle. Function of estimating working time and cost budget, intelligent input. Array input, immediately output and go back to origin to output orientation mode. Unique double laser systems working intermittently, working independently and motion trial with function of offset and control Set the working start point, working path, dock position of laser head according to different...

  • Page 7: Cautions

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 After confirming installation path, click 【OK/确定】. After installation, it will remind if need to continue to install USB driver. Click【是(Y)】： Click【OK/确定】, the installation is done successfully. 2.2 Cautions （1） Some antivirus software will take the file “LaserCAD/Setup.exe” in the installation directory as virus.

  • Page 8: Select Communication Mode

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Menu bar toolbar Object bar View zone Control panel Draw bar Align bar Color bar Status bar 【Menu bar】：Main function is to execute commend options in menu bar. Executing commend options is the basic operation; Menu bar includes 7 functions like file, edit, draw, tool, options, view and help.

  • Page 9: Select Usb Communication Mode

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 machine. If the communication mode is not setup correctly, user operates laser machine by this software, then software will come out tool tip as below: 3.2.1 Select USB Communication Mode 3.2.1.1 Steps of selecting USB communication mode Click【Select mode】: Click【USB mode】:...
  • Page 10 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Next setup USB communication port, double click Name 【Device Name】 as “Machine 1”, (Firstly use USB cable to connect computer with control panel) and then click【FindCom】: Click【OK】:...

  • Page 11: Select Network Communication Mode

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Now the USB communication mode is selected and machine name is “Machine 1”, USB communication is “4”. Click The process of 【Select USB Communication Mode】 is completed. Now user can use USB to control machine by computer. 3.2.2 Select Network Communication Mode Shall apply settings as following 2 steps to achieve network communication between computer &...
  • Page 12 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Click【Select Mode】: Click【Network Mode】:...
  • Page 13 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Set the IP for the machine, double click Name【Device Name】as “Machine 1”,Set【IP address】as the IP shown on LCD Panel: Click【OK】:...
  • Page 14 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Now network mode is selected with device name “Machine 1”, machine IP“192.168.8.8”, Click The process of 【Select Network communication mode】is completed. 3.2.2.2 Using network cable and control panel to do network communication directly to proceed computer IP setting Step 1, Check control panel IP on the LCD Panel.
  • Page 15 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Find control panel IP ：192.168.8.8. Step 2 Set computer IP according to control panel IP of LCD. The computer IP must be the same as the first 3 numbers of control panel (Current first 3 numbers of control panel IP is 192.168.8), the last number is different, (The last number of control panel IP is 8), so according the control panel IP got from step 1, shall set computer IP to be 192.168.8.X (X can be any number that not equals to 8 and not bigger than 255)
  • Page 16 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Double click <Local Area Connection> Double click【Internet Protocol (TCP/IP)】:...
  • Page 17 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Select <Using following IP address>, set <IP address> as192.168.8.10, set <subnet mask> as255.255.255.0 ： Click <OK> to finish computer IP setup. 3.2.2.3 Computer IP setting by network communication using network cable and control panel via router. Step 1, Set computer to obtain IP Automatically.
  • Page 18 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Click <View network connection> Double click <Local Area Connection>...
  • Page 19 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Double click【Internet Protocol (TCP/IP)】 Select <Obtain an IP address automatically>:...
  • Page 20 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Click <OK> to finish computer IP setup Step 2, Check current IP First connect computer to router via cable, so that the IP can be checked Steps as following:...

  • Page 21: System Options

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Check the current computer IP as 192.168.8.100 Step 2 Set control panel IP according to computer IP. The control panel IP must be the same as the first 3 numbers of computer IP (Current first 3 numbers for computer IP is 192.168.8), the last number is different, (the last number of computer IP is 100), so according to the computer IP got from step 1, shall set control panel IP to be 192.168.8.X (X can be any number that not equals to 100 and not bigger than 255)
  • Page 22 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Click【System options】or 5 sections included in 【System options】 : 【Work Space】 、 【Advance Functions】 、 【Work Parameters】 、 【Manufacturer Parameters】、【User Parameter】。...

  • Page 23: Work Space

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.3.1 Work Space View 3-3-1 【Nudge Offset】:Offset distance when use “←”，“→”，“↑”，“↓”to move selected object 【Paste Offset】:Offset distance when copy the offset distance of selected object, and paste to current view 【Language】Current using language 【Speed Unit】:All units used in the software 【Machine Zero】:current Zero position of machine(Limit position),the setting must be exactly the same with the actual machine zero position, or the machined image could be left/right reversed or up/down revered.

  • Page 24: Manufacturer Parameters

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【Grid Distance】：Grid distance shown in view 【Simulating show objects of engraving】 ： System will simulate and show the engraving image layer by filling. However, if the data volume of engraving image is too big, system will react quite slowly when show the view by filling.
  • Page 25 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【 Pulse Unit 】 :When sending a pulse to the motor, the absolute distance moved by the corresponding axis (unit: um). If the pulse unit setting is not correct, the processed image size will be different from the actual size. 【Pulse Edge】: Trigger edge when motor rotated by motor driver。If the pulse edge setting is not correct, may lead to cutting dislocation 【Datum】: Axes moving direction when reset。When the axial resetting movement direction is not...
  • Page 26 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 frequency laser (need burning pulse). 【TTL Level】:Choose the parameters according to external laser power supply switch signals, AWC608 laser switch signals corresponds with Laser1.TTL and Laser2.TTL.If [Low level effective] is selected, when laser on, the system will output the two signals for low level, when laser off, the system will output the two signals for high level;...

  • Page 27: User Parameter

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 RAM, and give control panel correct settings. Click [Save] If not click [Save] after parameter settings, the settings will not be effective. 3.3.3 User Parameter View 3-3-3 3.3.3.1Wrok Control Parameters (Refer to View 3-3-3) [Space Speed]: During work, the max operation speed of laser head when laser off. The value range of this parameter is limited to Axis [Max Speed] of manufacturer parameter, shall not be bigger than max speed of the manufacture parameter.
  • Page 28 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3 typical groups of [Wok control parameters] for users‘ reference： 3.3.3.2 System config parameters (refer to View 3-3-3) 【XY Home Speed】: Speed for machines’ returning to origin, normally is set at between 40~80.Too big setting may leading to big impact onto the limit switch which could break the switch.

  • Page 29: Advanced Function

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.3.3.4 User parameters read and save (Refer to View 3-3-3) Filename extensions for parameter files is cf5。 User Parameter reading, namely, read and input the saved control panel parameter into the software interface. Click [Read] User Parameter saving, namely, save the software interface settings into control panel RAM, and give control panel correct settings.
  • Page 30 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、...

  • Page 31: Work Parameters

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.3.5 Work parameters View 3-3-5 [Curve Disperse]: Curve smoothness setting. The smaller the value is, the bigger accuracy the image is, but will slow the computation speed, and affect the process speed. Generally choose small value for organic glass cutting, other cutting use the default value as 0.10 [Circle Speed]: The system will automatically recognize whether processing objects are cycles with speed limit, and then according to the diameter of cycle, use the current set speed limit to process the cycle.

  • Page 32: Open & Save Files

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 (1) Cycle diameter less than 5mm, processing speed to be 10mm/s (2) Cycle diameter between 5~10mm, processing speed to be 20mm/s (3) Cycle diameter more than 10mm, there is no processing speed limit, and equals to speed set in the parameter [Engrave Reverse offset]: When applying two-way engraving image, it may cause the edges of the scanned image not to be smooth due to mechanical return gap.

  • Page 33: Save File

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.4.2 Save File (1)Click [Save] option in [File] menu, or click icon, and open dialog box as below: (2) Input file name in the edit box, then click [Save] 3.5 Import & Export Files As the file format used in this software is pwj5, so importing is required when need to make or edit image in other format, and exporting the current file to other image so that it can apply to other software.

  • Page 34: Export File

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 please refer to 3.13.5) [DST,PLT Auto Smooth]: Apply auto smooth dealing when importing the image.(Introduction of[Auto Smooth] ,pls refer to 3.13.3) [Auto Order]: Apply auto order dealing when importing the image.(Introduction of[Auto Order] ,pls refer to 3.13.2) [PLT Unit]: Indicate the dimension of one unit in PLT file, different vale make different importing image dimension.

  • Page 35: Edit Node

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Choose font, input or select font size, input text and then click [OK]. 3.6.2 Edit Node Click [Node Edit] option in [Draw] menu, or click .Then tools （Add node） （Delete node） （Connect node） （Separate node） will be shown in the object operation bar. ◆...
  • Page 36 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Select a point Then click 【add node】of 【Edit】in menu, or click in object operation bar, the selected node is the added node of object shown as below: The selected point turn to a node ◆Delete node Select one node of the selected object as below: Select a node Then click 【delete node】...

  • Page 37: Select Object

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Then click 【connect node】 of 【Edit】 in menu, or click in object operation bar, that is connecting the node shown as below: Two nodes have been united as one 3.7 Select Object During the process of draw and edit graphic, firstly it’s to select an object. When an object is selected, there is a mark“...

  • Page 38: Object Color

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Select the color of objects, then click【Ok】 ，then all objects with the layer color will be selected. 3.8 Object color Object color means color object profile. Click color in layer bar change object color. 3.9 Object Transforming Objects transforming is mainly operations to change the objects’...

  • Page 39: Objects Size

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Move mouse to control arrow, and move control point along arrow direction; during movement, profile line generates and rotate as below: Release mouse when rotating to correct position, then rotation is complete. ◆ Tilting Objects Operation is the same as rotation.

  • Page 40: Object Aligning

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.10 Object Aligning Select several objects and click .Rendering shown as below when using 3.11 Objects Group Use “Group” command can join objects together, to operate and edit as one whole unit. Group operation is very simple. and select operated objects.

  • Page 41: Manual Order

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.13.1 Manual Order User can use [Manual Order] to set cutting serial number for each object, cutting start point and finish point. Click [Tool]/ [Manual Order], then [Manual Order] window will show at the left side of main interface as below: Staring point direction...

  • Page 42: Smooth Objects

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【Order by layer】:Image elements with the same color will be arrange in series(When laser cutting, will complete one color image processing, and then turn to another color. [Inner to outer]: Inner (contained) image will be prior to the outer (containing) image. (When laser cutting, it will complete inner image processing, then turn to outer image processing) [Automation set cut director]: Automatically set the image cutting start point and direction when...

  • Page 43: Unite Lines

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 [Repeated Error]: Error value to judge whether 2 adjacent are overlapped. 3.13.5 Unite Lines [Unite Lines] will unite linked multiple segment to single segment. Click [Tool]/ [Unite Lines], open dialog box as below and then click [OK] [Unite tolerance]: 2 segments will be united to 1 segment if their distances are smaller than tolerance.

  • Page 44: Parallel Offset

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 click in objects operation bar. Input [Dot Size], and then click [OK] Image Dither 3.13.8 Parallel Offset [Parallel Offset] is to offset inside or outside the vector graphics data. Select the data to be dealt, click [Tool] / [Parallel Offset] or click on object bar, and open dialog box as below.

  • Page 45: Estimate Work Time

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 3.13.9 Estimate Work Time [Estimate Work Time] will pre-calculate the processing time precisely according the current parameter settings and image data size. The calculation will be very precise, with error no more than 1 min even for image data with heavy work loading. Click [Tool]/ [Estimate Work Time] or click on object bar, and open dialog box as below.

  • Page 46: Chapter 4 Laser Machining

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 setting(may not the best)。 Note: The operation will not change the parameter inn control card (namely manufacturer parameter and user parameter) Click [Options]/ [Default Parameters], and open dialog box as below: Select [Machine Zero] correctly (The parameter must be the same as actual machine zero, or the processed image could be left/right turned or up/down turned), then click [OK] Chapter 4 Laser Machining 4.1 Position Relative...

  • Page 47: Array Output Options

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 4.2 Array Output Options Click menu 【Options】 / 【 array output options】 or click system tool bar ， dialog displayed as below: 【Cell width（X） 】 ：Original size of datum 【Cell height（Y） 】 ：Original size of datum 【Count】...

  • Page 48: Layer Options

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【material width(X)】 ：Width of material to be deal with（default as width of workbench） 【material height(Y)】 ：Height of material to be deal with(default as width of workbench） System will calculate the number of material to be deal with according to material size. The image below is an example of array parameter setting.

  • Page 49: Set Layer Parameters

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 View 4-3 4.3.1 Set Layer Parameters (refer to View 4-3) Click “output” column to select the layer output or not is layer output, is no layer output. Double click any row of layer parameter list （like： ）...
  • Page 50 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Select “cut” or “cut after engraving” in 【Work mode】 , cut parameter is valid as below image: 【Speed】 ：Working speed of laser head during cutting. 【Working power】 ：Maximum power; To adjust the maximum value of laser power during processing layer（Unit:%）.
  • Page 51 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【Speed】 ：Scanned speed during engraving. 【Working power】 ：Adjust size of laser power during processing layer.(Unit: %） 【Engrave gap】 ：Gap between scanning line. 【Engrave mode】 ：Includes “X_swing”, “X_ unilateralism”， “Y_swing”, “Y_unilateralism” X_swing: Laser head releases laser to scan image back and forth in horizontal direction.

  • Page 52: Adjust Layer Working Sequence

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【Speed】 ：Moving speed of laser head. 【Power】 ：Adjust size of laser power during processing layer. (Unit: %） 【Interval】 ：distance between holes. 【Time】 ：waiting time of laser head when punching holes. 4.3.2 Adjust Layer Working Sequence (refer to View 4-3) Processing sequence in layer list is from top to bottom.
  • Page 53 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 View 4-4-1 4.4.1.1Download current file data (image data of software) to the Machine (Refer to view 4-4-1) Current documents options ◆ 【Current documents options】means the options of document to be downloaded to main board. 【Name】 ：Document Name to be downloaded to main board 【Work Times】...
  • Page 54 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 (【Automatic Order】introduction, please refer to 3.13.2) ◆ Document Export (1) Save data as offline files (*.ud5 files),then copy to control panel via U disk Click [Save document to Ufile] to open dialog box: Input file name, and click [Save] (2) Download document to control panel directly per to USB or internet communication, Click [Download document] 4.4.1.2 Machine Document Management...

  • Page 55: Machine Control

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Four files are currently saved in mainboard [Work]: Select one file in the file list, click [Work] button to start the work. [Delete]: Select one file in the file list, click [Delete] button to delete the file in the main board memory.

  • Page 56: Chapter 5 Coreldraw Based Software

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 CorelDraw Based Software Chapter 5 5.1 Manual Download Tool“AWCLaserCut” After installation of CorelDraw direct output, (refer to Chapter 2 Installation of Software）,start CorelDraw, Main interface of CorelDraw12 shown as below: （1） Click menu【Tool】/【Macro】/【Run Macro】 as follows: （2）...
  • Page 57 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 （3）At【Mocras in】select “AWCCorelEx.Gms” or” AWCCorel12.Gms”, then at【Mocra name】select “AWCLaserCut.AWCInit ” as follows: （3） Click【Run】, main interface of CorelDraw can add tool “AWCLaserCut” as follows: “AWCLaserCut”toolbar...

  • Page 58: Display Hidden Tool "Awclasercut

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 （5）Use mouse to drag tool “AWCLaserCut” to toolbar as follows: “AWCLaserCut”toolbar （6 ）After manual loading tool “AWCLaserCut”in CorelDraw, then re-start CorelDraw, “AWCLaserCut” Tool will display in toolbar. 5.2 Display hidden tool “AWCLaserCut” User will close tool “AWCLaserCut” carelessly during using CorelDraw, so hidden tool should be displayed, operation as follows: Right click toolbar to display a list, then click【AWCLaserCut】...

  • Page 59: Switch Coreldraw To Lasercad

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Select DST/DSB file to be imported, then click【Open】. 5.4 Switch CorelDraw to LaserCAD Edit diagram in CorelDraw as follows: Click to switch to LaserCAD directly. And edited diagram in CorelDraw will display in the view of LaserCAD as follows:...

  • Page 60: Chapter 6 Autocad Based Software

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 In this case, we can complete laser machining by LaserCAD. AutoCAD Based Software Chapter 6 ADD AWCLaserCut toolbar. After installation of AutoCAD direct output, （refer to：Chapter 2 Installation of Software）,start AutoCAD, the main interface doesn’t display menu【Laser machining】and tool【Laser machining】, at the moment, it should be downloaded manually.

  • Page 61: Switch Autocad To Lasercad

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 （3） In【Macro name】 to select“…AWCLaserCut.AWC_Init_EN”, and then click 【run】,menu “AWCLaserCut” and tool ”AWCLaserCut”, as follows: AWCLaserCut toolbar AWCLaserCut Menu 6.2 Switch AutoCAD to LaserCAD Edit diagram in AutoCAD as follows:...
  • Page 62 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Click menu【AWCLaserCut】/【LaserCut】,or click to switch to LaserCAD and edited diagram in AutoCAD will display in the view of LaserCAD as follows: In this case, we can complete laser machining by LaserCAD.

  • Page 63: Chapter 7 Introduction Manual Of Blue Lcd Panel

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Chapter 7 Introduction Manual of blue LCD Panel 7.1 Function introduction to each key “Reset” Key: Press this key, machine can enter into the state of reset under circumstances, and then go back to “Original point” “Laser”...

  • Page 64: Interface Of Starting Computer

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Esc” Key: definition key to be applied to cancel operation and go back to last interface. “Stop” Key: Stop running machine. “Enter” Key: definition key to agree current operation. “Start/Pause” Key: Start to operate current file, it can realize stopping and continuing of running machine.

  • Page 65: Function Introduction To Main Interface

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 power (In-process power), the number behind is minimum power(power when turn around) 【power 1】can be switched to【power 2】 shown as below: 【speed】 ：Speed value set during machining graphic 【X】 ：show X-axis value of laser head with machine 【Y】...

  • Page 66: Check And Alter The Properties Of Current File

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 (2) press to move X-axis, press to move Y-axis In the state of “parameter alteration”: (1) Press , cursor will disappear and system will enter into state of “Key moving“. (2) Press to select other items, then press to enter into sub interface to alter parameter.

  • Page 67: Clear Total Working Times Of File (Refer To View 7-3)

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 press ： Press to move cursor onto one number, and then press to alter the number After alteration, press to finish the alteration of 【Repeat count】. 7.3.2 Clear total working times of file (refer to view 7-3) Press , cursor appears on main interface, then press to move...

  • Page 68: Switch Between "Power 1"&"Power 2" (Refer To View 7-3)

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Press to clear total working times of file. 7.3.3 Switch between “Power 1”&“Power 2” (refer to view 7-3) Press , cursor appears on main interface, press to move cursor onto item【power】: Press to enter into sub interface: Press to move cursor onto item【Laser 2】，then press Similar operation can also switch “power 2”...

  • Page 69: Change Speed, Maximum Power, Minimum Power (Refer To View 7-3)

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 7.3.4 Change speed, Maximum power, Minimum power (refer to view 7-3) Press , and cursor appears on main interface, press to move cursor onto item【speed】: Press to enter into sub interface: Press to move cursor onto one number, and then press to modify the number After modification, press to finish the modification of 【speed】.

  • Page 70: Udisk File

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 View 7-4 Under the main menu interface, press to move cursor onto one item. 7.4.1 UDisk file (Refer to View 7-4) This UDisk file system only support FAT32. Under the main menu interface, move cursor onto【UDisk file】, press to enter into 【Disk file 】...
  • Page 71 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 7.4.1.1 Work file (refer to view 7-5) Under the 【UDisk file】, press to move cursor onto item【work’ files】, press enter into 【work’ files】 interface: Press to move cursor onto one file, and then press , system will copy the file into the memory of control panel.

  • Page 72: Parameter Option

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 (suffix of system upgrade file is ug5)。 7.4.1.4 Save Current parameter to UDisk(refer to graphic 7-5) Under【UDisk file】interface, press to move cursor onto item【Curr config to UDisk】. Press , system will copy a parameter of control panel into U-disk. The file name is Params.cf5。 7.4.2 Parameter Option(refer to view 7-4) Under the main menu interface, press to move cursor onto item...

  • Page 73: Origin Mode

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Press to move cursor onto one item, and then press Move cursor onto item【move to origin1】, and then press , system will move laser head to the original position 1 (X=20.0mm，Y=30.0mm). Move cursor onto item [Current as Origin1], and then press , system will set the position of current laser head as original position 1.

  • Page 74: Control Mode

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【Key origin】 ：Take the original point selected by of LCD panel as beginning. 【Soft origin】 ：System will work according to the position of data on coordinate of software. 【Machine zero】 ：Take zero point of machine (limit point) as beginning. Press to move cursor onto one item, then press to set specific orientation...

  • Page 75: Memory Management

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Press to move cursor onto one item and then press to set parameter control mode 7.4.6 Memory management (refer to view 7-4) Under the main menu interface, press to move cursor onto item 【Memory manage】, press to enter into 【memory manage】interface: 【format memory】: format the memory of control panel, it will delete all files saved in control panel.

  • Page 76: Inching Control

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【U axis reset】; U-axis starts to move to reset. U-axis can’t reset when U-axis is feeding axis (Regarding the function and configuration of U-axis, please refer to 3.3.2.4 Function and configuration) 【U axis orgin:3.0mm】 ： the mobile distance of U-axis in opposition direction after reaching limit. Press to move cursor, and then press to do operation and setting...

  • Page 77: Cut Box

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Under 【inching control】interface, press to go back to the main menu interface. 7.4.9 Cut box (refer to view 7-4) Under the main menu interface, press to move cursor onto item【cut box】, then press to enter into 【cut box】interface: 【blank 】:The distance between border of graphic and border of cut part.

  • Page 78: Languages

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Press to move cursor onto one item, then press to enter into sub interface to modify this value （Regarding more content of network communication of computer and control panel, please refer to 3.2.2 Select network communication mode） 7.4.11 Languages (refer to view 7-4) Under the main menu interface, press to move cursor onto item...

  • Page 79: Z/U Axis

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Version of 【Main Board】can be upgraded by【UDisk file】to the newest one. （Refer to 7.4.1.3 System upgrade file） 7.5 Z/U axis Under the main interface, press Press to move cursor to select one item When select【Auto focus】and press , Z-axis will move at the speed of 【Z-axis reset speed】...
  • Page 80 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 In【file】interface, it will show all working files saved in the memory of control board. Press to move cursor on one item and then press Press to move cursor to select one item Select【select】, and press , system will select files and go back to main interface.

  • Page 81: Chapter 8 Introduction Manual Of Color Lcd Panel

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Chapter 8 Introduction Manual of Color LCD Panel 8.1 Function introduction to each key “Reset” Key: Press this key, machine can enter into the state of reset under circumstances, and then go back to “Original point”...
  • Page 82 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 “Laser” Key: Be applied to test Optical path. Press it to flash. “Menu” Key: Press this key to enter into main menu. “Box” Key: Be applied to test the size of graphic to be cut and test the current original point.

  • Page 83: Interface Of Starting Computer

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 8.2 Interface of starting computer Interface of starting computer shown as below: After initialization, it enters into main interface shown as below: 【File】 ：show the file name. the left to display graphics 【Count】 ：show times of current diagram after adding one by one. 【Speed】...

  • Page 84: Function Introduction To Main Interface

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 8.3 Function introduction to main interface View 8-3-1 Under the main interface, press , cursor will appear on one item selected show as below: When there is no cursor, system is in state of “Key moving“; when there is cursor, system is in state of “parameter alteration”.
  • Page 85 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 (2)Press to enter into properties sub interface of file: View 8-3-2 selec (3)Press 【Document Property Settings】,Press To enter into Document property settings View 8-3-3 8.3.1.2 Alter the properties of current file Take altering the【Repeat count】 of file for example, to explain how to alter the properties of files. Refer to view 8-3-3,press or “the number keys”...

  • Page 86: Clear Total Working Times Of File

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Layer Params Settings 8.3.1.3 , The main interface appears the cursor,then press to move Press cursor onto item 【File】: View 8-3-1 Press to enter into properties sub interface of file: View 8-3-2 Press select layer Params settings to enter into layer 】...

  • Page 87: Udisk File

    8.4.1 UDisk file (Refer to View 8-4) This UDisk file system only support FAT32. Under the main menu interface, Press to move cursor onto【UDisk file】, press to enter into 【Disk file】interface (User must insert U-disk into U-disk interface in control board of AWC608C)
  • Page 88 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 View 8-4-1 8.4.1.1 Work file (refer to view 8-4-1) Under the 【UDisk file】, press to move cursor onto item【work’ files】, press to enter into 【work’ files】 interface: view8-4-1-1 Press to move cursor onto one file, and then press , system will copy the file into the memory of control panel.

  • Page 89: 2Origin Manage

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 press , system will upgrade according to upgrade file. System will go to state of reset after upgrade finished. During update, don’t cut power of control panel. Otherwise it will damage the system. (suffix of system upgrade file is ug5)。 8.4.1.4 Save Current parameter to UDisk(refer to graphic 8-4-1) Under【UDisk file】interface, press to move cursor onto item【Curr config to UDisk】.

  • Page 90: Jog Control

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 current laser head as original position 1. Move cursor onto item 【origin 1(X)】or item【origin 1(Y)】, then press , it will enter into sub interface to do modification manually on coordinate of original position. 8.4.3 Jog Control (refer to view 8-4) Under the main menu interface, press to move cursor onto item 【Jog control】...

  • Page 91: Axes Control

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 【blank 】:The distance between border of graphic and border of cut part. Press to move cursor onto one item When select item【cut box】, press , system will cut outline border at the speed of 【Speed of cutting border】...

  • Page 92: 7Common Params Settings

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Parameters Settings】, then press to enter into 【Motion Parameters Settings】interface: Press to move cursor onto one item When select a item press to enter into sub interface to set 8.4.7Common Params Settings (refer to view 8-4) Under the main menu interface, press to move cursor onto item【Common Params Settings】, then press...

  • Page 93: Network Config

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Machine zero or Soft origin, Press the number keys can be set to the other numerical parameters. 【Key origin】 ：Take the original point selected by of LCD panel as beginning. 【Soft origin】 ：System will work according to the position of data on coordinate of software. 【Machine zero】...

  • Page 94: System Version

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 8.4.10 System Version (refer to view 8-4) Under the main menu interface, press to move cursor onto item 【system version】, press to enter into 【system version】interface: Version of 【Main Board】can be upgraded by【UDisk file】to the newest one. （Refer to 8.4.1.3 System upgrade file）...

  • Page 95: Files System

    LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 8.6 Files system Under the main interface, press to enter into 【file】interface: In【file】interface, it will show all working files saved in the memory of control board. Press to move cursor on one item ,press to move cursor on 【Preview】(the right)and then press to select “open”...
  • Page 96 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Press )to move cursor to select one item or the number keys( (1) Select【X Axis Parameters】/【Y Axis Parameters】/【Z Axis Parameters】/【U Axis Parameters】 and press , to enter into I the corresponding sub-interface. Press to move cursor to select one item, Press or the number keys to Complete parameters (2) Select【Laser Parameters】and press...
  • Page 97 LASER ENGRAVING&CUTTING CONTROLLER AWC608 、 Complete parameters (3) Select【I/O Parameters】and press , to enter into I the corresponding sub-interface. Press to move cursor to select one item, Press Complete parameters (4) Select【Function Config】and press , to enter into I the corresponding sub-interface. Press to move cursor to select one item, Press Complete parameters...

Table of Contents

Save PDF