VOLTCRAFT BS-310XWIFI Operating Instructions Manual page 23

Interrupting/re-establishing a Wi-Fi connection.
• Press the Wi-Fi button (5) to interrupt an existing Wi-Fi connection between the endoscope and a mobile device.
• Press the Wi-Fi button (5) to re-establish the Wi-Fi connection between the endoscope and your mobile device.
• You may need to restart the real-time display in the app. See "d) Onscreen buttons" for details.
• For details on how to set up a Wi-Fi connection, see "10. Using the app b) Establishing a Wi-Fi connection".
Setting the brightness
• The camera head features four built-in LEDs. Press the brightness button (8) to adjust the brightness of the LEDs
and turn the light on/off. The brightness is indicated in percent in the upper-right corner of the LCD display (4).
• Adjust the brightness so that the image displayed on the monitor is not over- or underexposed.
Photo and video functions
• Press the camera button (9) to take a photo.
• Press the video button (11) once to start recording a video.
• Press the video button (11) again to stop the recording.
The endoscope must be connected to the app via Wi-Fi in order to take photos and videos. If the endoscope
is not connected to the app, these buttons (9 and 11) have no function. The video will be saved to an
automatically-generated folder on your mobile device. See "10. Using the app" for details.
Restoring the endoscope to factory settings
Restore the factory settings if you want to rename your network or when you forget your password.
• To restore factory settings, press the RESET button (12) on the back of the endoscope. For best results, use
a straightened paper clip. You will feel a slight click when you press the button. The endoscope will switch off
automatically when factory settings have been restored. The Wi-Fi network password will be reset to the factory
default.
23