Page 2
Herstellers führen. Für manufacturer. The creator is grateful for sug- Verbesserungsvorschläge Ersteller gestions for improvement. dankbar. Ersteller: Creator: Polytron-Vertrieb GmbH Polytron-Vertrieb GmbH Postfach 10 02 33 Postfach 10 02 33 75313 Bad Wildbad 75313 Bad Wildbad Germany Germany...
Page 3
Beschreibung Description The SPM-T2CT converts two DVB- Das SPM-T2CT wandelt zwei DVB- T2 channel into two DVB-T signals. T/T2 Transponder in zwei DVB-C Signale um. The module is flexibly applicable and can be adapt to various requirements Das Modul ist flexibel einsetzbar und...
Inbetriebnahme Putting into operation The assembly of the base unit and Die Bestückung der Grundeinheit und the construction of the entrance dis- der Aufbau der Eingangsverteilung tribution takes place in accordance erfolgt gemäß der dem Grundgerät with the user manual enclosed to the beiliegenden Anleitung.
Page 5
Programmierung der Programming procedure Module for the modules Nach der Bestückung der Grundein- After the assembly of the base unit heit und dem Aufbau der Eingangs- and the construction of the entrance verteilung erfolgt zunächst die Pro- distribution, the base unit has to be grammierung der Grundeinheit ge- programmed in accordance with the mäß...
Page 6
NOTE HINWEIS ATTENTION ACHTUNG The min. required software ver- Die im Grundgerät benötigte sion of the base unit for error- min. Softwareversion zur fehler- free programming, is specified freien Programmierung der Mo- on the module. dule, ist auf dem Modul ange- geben.
Page 10
3.3. LED Anzeige 3.3. LED Indication Bedeutung / Meaning Grün an / Das Modul ist betriebsbereit und das Eingangssignal Green on ist angeschlossen / The module is powered and the input signal is connected. Grün blinkt / Das Modul ist betriebsbereit aber das Eingangssignal Green blinks ist nicht angeschlossen oder das Modul führt ein FLASH-Update durch.
4 Firmware Upgrade 4 Firmware Upgrade Die Modul-Firmware kann durch das The module firmware can be up- Anschließen eines PCs über die graded by using a PC through the USB-Schnittstelle und der benutzer- USB Interface and a user friendly freundlichen PC-basierenden “T2CT PC based software named “T2CT Upgrade Software”...
Need help?
Do you have a question about the SPM-T2CT and is the answer not in the manual?
Questions and answers