Advertisement
Issue
Solution
Thin (out
This is usually caused when two pickups are out of phase with each other.
Reverse the connector positions of the hot and ground wires from one of the
of phase)
pickups.
sound
Before you make the change, take some time to work out which pickup is
least likely to interfere with other switch positions. If you have just installed a
new pickup, change this one.
What colour
Pickup manufacturers use their own colour coding systems. Check the pickup
builder's instructions & compare to the instructions in this booklet.
wires go
where?
Also see a list of popular pickup codes here obsidianwire.com/install-help
Custom
Ensure the neck pickup ground & cover ground wires are in the correct
slots.
4-Way for
Tele - Same
Ensure the link between your pickups ground wire & the cover ground wire
has been removed.
sound in all
positions
Page 17
Advertisement
