Advertisement
Troubleshooting
Issue
Solution
No Sound
Ensure spacer nuts are in place. Spacer nuts come pre-loaded on all
ObsidianWire Pro-Wired Electronics. These must sit BETWEEN the board
and control plate / cavity.
Ensure all wires are in the correct slots & held secure.
Ensure no part of your Pro-Wired Electronics is touching the cavity.
No Sound
Check as above for 'No Sound'.
One Pickup
Check that your pickups are working correctly (even brand new pickups).
Excess
Ensure all metal parts are grounded to your Pro-Wired Electronics,
including your bridge and cavity shielding.
Hum
Ensure all wires are secure at both ends.
Ensure output wires are in the correct connector slots.
Page 16
Advertisement
