Yamaha WA66540 Owner's Manual page 24

Appendix
■ Digital effect type list
• Common to EFFECT 1 and 2
No. Type
1 REVERB HALL
2 REVERB ROOM
3
REVERB PLATE
4
REVERB VOCAL 1
5 REVERB VOCAL 2
6 VOCAL ECHO 1
7
VOCAL ECHO 2
8
DELAY 1
9 DELAY 2
• EFFECT 1
0
MOD. DELAY
A
REVERB GATE
B PITCH CHANGE
C
CHORUS
D
PHASER
E
RADIO VOICE
F TREMOLO
• EFFECT 2
0
EARLY REF.
A
GATE REVERB
B
VOCAL DOUBLER
C SYMPHONIC
D
FLANGE
E
DISTORTION
F
TAP DELAY
MG32/14FX, MG24/14FX
24
Description
Reverberation simulating a spacious expanse such as a concert hall. Reverb time
Reverberation simulating the acoustics of a small room.
Simulation of a plate reverb device. Produces a hard-sounding rever-
beration.
Ideal reverb for vocals.
Ideal echo for vocals.
Delay effect that delays the signal.
Monaural delay with modulation.
An effect that simulates reversed early reflections.
An effect that changes the pitch of the input signal.
Modulates the delay time of the signal to add depth to the sound.
An effect that changes the phase of the sound to create modulation.
An effect that produces a lo-fi sound like that of an AM radio.
An effect that adds modulation to the sound.
An effect produced by modifying the early reflections. It lets you add
depth to the sound, or create echo-like effects.
An effect produced by cutting the reverberation.
Produces an effect as though two people were singing.
Gives a richly layered depth to the sound.
Adds a sense of pitch to the tone. Effective on sounds that contain
numerous overtones.
The well-known effect used to distort the sound.
This effect sets the delay time to the interval at which you actually
press the switch. The amount of feedback can be adjusted by the
PARAMETER control. The LED will blink in synchronization with the
delay time.
Reverb time
Reverb time
Reverb time
Delay time
Delay time
Delay time
Room size
Pitch
Depth
Modulation frequency 0.05–4.00 Hz
Drive
Modulation frequency 0.05–10.00 Hz
Room size
Room size
Pitch fine
Depth
Modulation frequency 0.05–4.00 Hz
Drive
Feedback gain
Delay time
* The LED can not blink any faster than an interval of 256 ms (234.3 bpm).
Controllable parameter
Parameter Variable range
0.3–10.0 s
0.3–3.2 s
0.3–10.0 s
0.3–10.0 s
0–800 ms
0–800 ms
0–800 ms
0.1–10.0
–12–+12
0–100%
0–100
0.1–10.0
0.1–5.0
0–50
0–100%
0–100
0–99%
100 ms (600 bpm)
–2690 ms
(22.3 bpm)*