Yamaha WA66540 Owner's Manual page 23

■ Input Specifications
Input Connector
CH INPUT (A, B)
(MG32/14FX: CHs 1 to 24)
(MG24/14FX: CHs 1 to 16)
ST CH INPUT
(MG32/14FX: CHs 25(L)/26(R)
to 31(L)/32(R))
(MG24/14FX: CHs 17(L)/18(R)
to 23(L)/24(R))
ST INSERT IN [L, R]
GROUP INSERT IN (1 - 4)
CH INSERT IN
(MG32/14FX: CHs 1 to 24)
(MG24/14FX: CHs 1 to 16)
RETURN (1, 2) (L, R)
TALK BACK
2TR IN (L, R)
Where 0 dBu = 0.775 V and 0 dBV= 1 V
1
Input sensitivity: the lowest level that will produce the nominal output level when the unit is set to maximum gain.
2
MG32/14FX: CH29(L)/30(R), CH31(L)/32(R), MG24/14FX: CH21(L)/22(R), CH23(L)/24(R)
■ Output Specifications
Output Connectors
Impedance
ST OUT (L, R)
75
MONO
GROUP OUT (1-4)
150
AUX SEND (1-6)
ST SUB OUT (L, R)
150
EFFECT SNED (1, 2)
REC OUT (L, R) 600
CH INSERT OUT
(MG32/14FX: CH 1- 24)
(MG24/14FX: CH 1- 16)
150
GROUP INSERT OUT
(1-4)
ST INSERT OUT (L, R)
PHONES 100
Where 0 dBu = 0.775 V and 0 dBV= 1 V
Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify
products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale,
please check with your Yamaha dealer.
European Models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 14A
Conforms to Environments: E1, E2, E3 and E4
Input Appropriate
PAD Gain
Impedance Impedance
0
–60
26
50–600
Ω
3 k
Ω
600
0
–16
26
–34
Ω Ω
10 k 600
+10
Ω Ω
10 k 600
Ω Ω
10 k 600
Ω Ω
10 k 600
50 - 600
Ω
10 k
mic
Ω Ω
10 k 600
Output Appropriate
Rated Level
Impedance
Ω Ω
600 line +4 dBu (1.23 V)
Ω Ω
600 line +4 dBu (1.23 V)
Ω Ω
10 k line +4 dBu (1.23 V)
Ω Ω
10 k line –10 dBV (316 mV) +10 dBV (3.16 V) RCA pin jack
Ω Ω
10 k line 0 dBu (0.775 V)
Ω Ω
40 phone 3 mW
Rated Level Max. Before
1
Sensitivity
–80 dBu –60 dBu
(0.078 mV) (0.775 mV)
–54 dBu –34 dBu
(1.55 mV) (15.5 mV)
Ω
mic
line
–36 dBu –16 dBu
(12.3 mV) (123 mV)
–10 dBu +10 dBu
(245 mV) (2.45 V)
–54 dBu –34 dBu
(1.55 mV) (15.5 mV)
line
–10 dBu +10 dBu
(245 mV) (2.45 V)
–10 dBu 0 dBu
line
(245 mV) (0.775 V)
–20 dBu 0 dBu
line
(77.5 mV) (0.775 V)
–12 dBu +4 dBu
line
(195 mV) (1.23 V)
Ω
–66 dBu –50 dBu
(0.388 mV) (2.45 mV)
–26 dBV –10 dBV
line
(50.1 mV) (316 mV)
Max. Before
Clipping
+24 dBu (12.3 V) XLR-3-32 type (balanced)
+20 dBu (7.75 V)
+20 dBu (7.75 V)
+20 dBu (7.75 V) Phone jack (TRS)
75 mW
Appendix
Connector
Clipping Specifications
–40 dBu
(7.75 mV)
–-14 dBu
A: XLR-3-31 type (bal-
(155 mV)
anced)
B: Phone jack (TRS)
(balanced
+4 dBu
[T: hot; R: cold; S: ground])
(1.23 V)
+30 dBu
(24.5 V)
–14 dBu
(155 mV)
Phone jack (unbalanced),
2
RCA pin jack
+30 dBu
(24.5 V)
+20 dBu
(7.75 V)
Phone jack (TRS)
(unbalanced
[T: out; R: in; S: ground])
+20 dBu
(7.75 V)
+24 dBu Phone jack (TRS)
(12.3 V) (unbalanced)
–30 dBu XLR-3-31 type
(24.5 mV) (unbalanced)
+10 dBV
RCA pin jack
(3.16 V)
Connector Specifications
Phone jack (TRS)
(impedance balanced [T: hot; R: cold; S:
ground])
Phone jack (TRS)
(impedance balanced [T: hot; R: cold; S:
ground])
(unbalanced [T: out; R: in; S: ground])
Stereo phone jack
MG32/14FX, MG24/14FX
23