Attaching The Toys; Storing The Exersaucer - Evenflo ExerSaucer Fast Fold Go Instructions Manual

Attaching the Toys

(Toys vary by model.)
Press here
To install toys, press firmly into tray as shown. Pull up on
stalk toys to make sure they are locked in place.
To remove stalk toys, squeeze tabs
from tray.
O
and lift stalk toys
O
Remove
14
1. Adjust legs to their lowest position.
To adjust height:
ALWAYS remove baby from ExerSaucer before adjusting. Push
button until the unit is in the lowest position. Make sure that
all three legs are adjusted to the lowest position.
2. Turn ExerSaucer upside down. Locate three (3) feet
by squeezing tabs and pulling foot off leg. Repeat until all three (3)
feet are removed.
3. Push foot onto tray until it snaps into place. Repeat
until all three (3) feet are locked into place.
D A
4. Locate three (3) legs . Push release button and rotate leg down until it locks
into the lowest position. Repeat until all three (3) legs are locked into the lowest
position. Pull up on legs to make sure they are locked in place.
B
C

Storing the ExerSaucer

N
N
. Remove foot
D
B
A
D
15