Connections; Power Connections - dallmeier Domera DJB-115W Installation Manual

Outdoor Mounting Accessories – Junction Box DJB-115W
6

Connections

The connection and commissioning of the unit may only be carried out by qualified per-
sonnel.
6.1

Power Connections

AC INPUT
 First, set the correct AC mains power voltage suitable for your country (115 V or 230 V)
before connecting the AC mains power to the AC input terminal.
 Next, connect the protective earthing conductor to the AC input terminal labelled with
"PE" (protective earth).
 Then, connect the AC live wire (phase conductor) to the AC input terminal labelled
with "L" (live wire) and the AC neutral wire (return conductor) to the AC input terminal
labelled with "N" (neutral wire).
 Finally, connect the camera and/or other equipment (e.g. heater of weather-proof hous-
ing) to the AC output terminal.
22
DANGeR
electric shock hazard
Danger of death or serious injury
 Disconnect the power supply unit from the mains socket before con-
necting or disconnecting the device or ensure that the AC mains power
outside the device is switched OFF.
115
115
230
115V/230V
SWITCH
PoE
AL1 AL5
AL2 AL6
AL3 AL7
AL4 AL8
GND GND
COM COM
NC1 NC2
NO1 NO2
PoE
PoE+2 AL1 AL5
PoE+1 AL2 AL6
RX−
AL3 AL7
PoE−2 AL4 AL8
PoE−1 GND GND
RX+ COM COM
TX− NC1 NC2
TX+ NO1 NO2
Fig. 6-1: Power connections
OUT 3
RX+
RX− Line IN
TX+
TX−
RS485
Line OUT
OUT R
OUT L
OUT GND
IN R
IN L
IN GND
www.dallmeier.com
OUT 1
OUT 2
AC OUTPUT