Boss BR-600 Owner's Manual page 51

3
Press CURSOR [ ] [
is displayed, then turn the TIME/VALUE dial to
select the loop effect.
When using CHO/DLY
Select from "CHORUS," "DELAY," or "DBLN"
(doubling).
fig.00-660
When using REV
Select from "HALL" or "ROOM."
fig.00-670
You cannot use chorus, delay, and doubling
simultaneously. Any one may be selected while loop
effects are in use.
4
If you want to change the settings for the selected
effect, press CURSOR [
parameter, then change the setting's value with the
TIME/VALUE dial.
fig.00-680
For more on the settings content, refer to "Loop
Effect Parameter Functions" (p. 120).
] until "FX Type" or "Type"
] [ ] to select the
Putting multiple tracks together (Bounce)
5
Press CURSOR [ ] [
settings screen.
When using CHO/DLY
fig.00-690
When using REV
fig.00-700
6
Press CURSOR [ ] [
to adjust each track's send level.
* Pressing a REC TRACK button moves the cursor to the
track corresponding to the button pressed.
7
After you have completed adjusting the send level,
press [EXIT] repeatedly to return to the Play screen
The "send level" is the volume level of the signal sent
from each respective track to each effect, and you can
change the amount of effect applied by adjusting the
send level.
] to display the Send Level
] and the TIME/VALUE dial
51