APPLICATION EXAMPLES
The MC1204 will be used in the following application
examples Actual application may require more input
channels, in which case the MC1604 or MC2404 are
recommended.
A Sound Reinforcement System
Balanced microphones are plugged directly into the
channel XLR input connectors, while unbalanced elec
tronic instrument outputs (synthesizers, etc.) are con
nected via a balancing transformer type direct box.
Compressors are connected at the insert jacks of the
vocal mic channels, and a "flanger" effect is con
nected at the insert jack on one of the instrument
channels. The ECHO 1 SEND and RETURN connectors
are hooked up to a digital delay unit, while a reverb unit
is connected to the ECHO 2 SEND and RETURN. The
DIGITAL
REVERB UNIT
SPEAKER SYSTEM
COMPRESSOR
LIMITER
DIGITAL
DELAY UNIT
PF 15
BALANCING
DIRECT
BOX
BALANCING
DIRECT
BOX
DX 7
SYNTHESIZER
IN
COMPRESSOR
OUT '--_ _ _ _
---1
COMPRESSOR
INSTRUMENT
VOCAL
MICS
MICS
EQUALIZER
f------l
POWER AMP
f - - - - - I
MONITER SPEAKER
'---.-.I
EQUALIZER
f------l
POWER AMP
f - - - - - I
MONITER SPEAKER
STEREO OUT connectors feed the main left and right
house speaker power amplifiers via graphic equalizers.
The FB OUT connectors feed the stage monitor
amp/speakers, also via graphic equalizers for feedback
control. The GROUP OUT connectors feed a 4-track
tape recorder so that the performance can be recorded
and remixed later to stereo. The GROUP INSERT
II\J/OUT jacks may be used to connect a com
pressor/limiter or other effect which will then process
all the channels assigned to that group.
12