Yamaha IM8-24 Owner's Manual page 11

K
PFL Switch/Indicator
When the PFL switch is on, the indicator will light and
the channel pre-fader signal is output to the PHONES
and MONITOR OUT jacks for monitoring.
NOTE
· When you turn on the PFL switch, the PFL indicator of the
MONITOR section (page 18) will light.
L
Channel Fader
Adjusts the output level of the input channel signal. Use
these faders to adjust the balance between the various
channels.
NOTE
· To minimize noise, the faders of unused channels should
be set to the lowest position.
· The channel faders will affect the ST, MONO, GROUP 1–
8, and AUX 1–8 (when the PRE switch is off) buses.
Controls and Functions
11
Owner's Manual